Festool Subframe UG-CSC-SYS
Official Festool Dealer
- 100% genuine products
- Manufacturer warranty and service
- Professional consultation
More accessories
Fits these products
The UG-CSC-SYS subframe is an ideal 3:1 solution for installation work.
It can be used as a hand truck for transportation from the vehicle to the place of use - a tower consisting of Systainers weighing up to 80 kg rolls easily to the construction site.
The folding legs can be unfolded in an instant and you have a work table measuring 58 x 58 cm; a practical alternative to trestles. The perforated plate allows workpieces to be securely fastened to the work surface. However, the advantages of the subframe become apparent in combination with the battery universal circular saw CSC SYS 50, which is attached to the holes in the work surface and provides you with an ergonomic work surface height of 90 cm.
If you are working with the battery universal circular saw CSC SYS 50 on the floor surface, for example when installing floor coverings, you do not need to unfold the saw legs. The "shovel", which you just used as a transport surface for the Systainer, forms an ideal support base for long workpieces for all longitudinal, cross and miter cuts when set upright.
Sturdy rollers
Rubberized rollers are designed for loads up to 80 kg.
Safe transportation
The Systainer securely locks onto the base plate. It can also be secured with a tension strap.
Firmly in hand
The handle intended for pulling and pushing is constantly accessible thanks to its clever shape. When the subframe is set up as a work table, it is located below the work surface and is never in the way.
Convenient folding legs
Unfolded without tools, the swivel leg can balance out uneven floors.
Large work surface
Simply turn the base plate around - and you achieve a work surface measuring 58 x 58 cm. Working height: 68 cm.
Load-bearing
The work table can carry up to 100 kg.
Always clean
The folding legs protect the work surface when the subframe is used as a cart. This keeps the work surface clean.
Strongly fix
The hole pattern on the work surface allows workpieces to be clamped and securely fixed to the work surface with Festool pit screws or pullers.
Ergonomic working height
The battery universal circular saw CSC SYS 50 has a comfortable working height of 90 cm on the subframe.
Table dimensions: 580 x 580 mm
Dimensions (W x D x H): 1067 x 580.00 x 245.00 mm
Workbench height in high working position: 677.00 mm
Workbench height in low working position: 245.00 mm
Workbench/hand truck load capacity: 100 / 80 kg
Product weight without accessories: 18.10 kg
Transport weight including accessories: 25.2 kg
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
All products come with manufacturer warranty as required by law.
We ship from Estonia
Delivery time depends on stock
This product has no reviews yet. Be the first to rate it.
Product description
The UG-CSC-SYS subframe is an ideal 3:1 solution for installation work.
It can be used as a hand truck for transportation from the vehicle to the place of use - a tower consisting of Systainers weighing up to 80 kg rolls easily to the construction site.
The folding legs can be unfolded in an instant and you have a work table measuring 58 x 58 cm; a practical alternative to trestles. The perforated plate allows workpieces to be securely fastened to the work surface. However, the advantages of the subframe become apparent in combination with the battery universal circular saw CSC SYS 50, which is attached to the holes in the work surface and provides you with an ergonomic work surface height of 90 cm.
If you are working with the battery universal circular saw CSC SYS 50 on the floor surface, for example when installing floor coverings, you do not need to unfold the saw legs. The "shovel", which you just used as a transport surface for the Systainer, forms an ideal support base for long workpieces for all longitudinal, cross and miter cuts when set upright.
Sturdy rollers
Rubberized rollers are designed for loads up to 80 kg.
Safe transportation
The Systainer securely locks onto the base plate. It can also be secured with a tension strap.
Firmly in hand
The handle intended for pulling and pushing is constantly accessible thanks to its clever shape. When the subframe is set up as a work table, it is located below the work surface and is never in the way.
Convenient folding legs
Unfolded without tools, the swivel leg can balance out uneven floors.
Large work surface
Simply turn the base plate around - and you achieve a work surface measuring 58 x 58 cm. Working height: 68 cm.
Load-bearing
The work table can carry up to 100 kg.
Always clean
The folding legs protect the work surface when the subframe is used as a cart. This keeps the work surface clean.
Strongly fix
The hole pattern on the work surface allows workpieces to be clamped and securely fixed to the work surface with Festool pit screws or pullers.
Ergonomic working height
The battery universal circular saw CSC SYS 50 has a comfortable working height of 90 cm on the subframe.
Technical Specifications
Table dimensions: 580 x 580 mm
Dimensions (W x D x H): 1067 x 580.00 x 245.00 mm
Workbench height in high working position: 677.00 mm
Workbench height in low working position: 245.00 mm
Workbench/hand truck load capacity: 100 / 80 kg
Product weight without accessories: 18.10 kg
Transport weight including accessories: 25.2 kg
Shipping & Delivery
We ship from Estonia
Delivery time depends on stock
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
All products come with manufacturer warranty as required by law.
Reviews
This product has no reviews yet. Be the first to rate it.
Festool Subframe UG-CSC-SYS
577001