Festool miter saw KAPEX KS 120 REB-Set-MFT

Power: 1600 W
Idle speed: 1400 - 3600 min⁻¹
Saw blade Ø: 260 mm
Tilt angle: 47/47 °
Angle: 50/60 °
Dimensions (LxWxH): 713.00 x 500.00 x 470.00 mm
Cable length: 3.50 m
Dust extractor connector Ø: 27/36 mm
Working height: 900.00 mm
Product weight without accessories: 24.30 kg
Motor type: Network

Special cutting depth 45°/90° (left): 40.00 x 120.00 mm
Special cutting depth 45°/90° (right): 20.00 x 120.00 mm
Cutting depth 50°/90° (left): 196 x 88 mm
Cutting depth 60°/90° (right): 152 x 88 mm
Cutting depth 45°/45° (left): 215 x 55 mm
Cutting depth 45°/45° (right): 215 x 35 mm
Edge molding diagonal cut at 90°/90°: 168.00 mm
Edge molding diagonal cut at 45°/90°: 168.00 mm
Cutting depth 90°/90°: 305 x 88 mm
Cutting depth 45°/90°: 215 x 88 mm
Special cutting depth 90°/90°: 60.00 x 120.00 mm

Sawing: Average total vibration ah: 2.50 m/s⊃2;
Sawing: series of standards EN 61029-2-9
Sawing: measurement uncertainty (noise) K: 3.00 dB
Sawing: A-weighted sound power level Lw: 101.00 dB(A)
Sawing: A-weighted sound pressure level Lp: 88.00 dB(A)
Sawing: Measurement uncertainty (vibration) K: 1.50 m/s⊃2;

Delivery set:
saw blade WOOD UNIVERSAL HW 260x2,5x30 W60
miter angle
workpiece clamp
multifunctional table MFT KAPEX
AB-KA-UG corner support
hex key SW 6
trimming accessory KA-UG-R/L
mounting kit

Main applications:
Installation of floor and ceiling moldings up to 120 mm high – without calculation
Cutting boards and panels up to 305 x 88 mm in length
Installation work of edge moldings up to 168 mm in the "wall starting position"
Cutting of beams and rafters up to 88 mm thick

Drives left, drives right. Even where others only pretend. Together with double-sided ball sleeves that hold the carriage with double force and ultra-large columns precisely on course. The double seal ensures extreme durability, is always accurate and without play.

Maximum precision for the perfect cut
The KS 120 convinces with precise cuts thanks to the two-column guide, an impressive cutting capacity of up to 120 mm and a weight of only 21.5 kg.

Ultra-strong and with double ball bearings
Festool's two-column guide ensures safe and trouble-free movement of the saw blade and maximum cutting accuracy.

Extra class to the smallest detail
Double-line laser for precise marking of the saw cut.

Strong and mobile for heavy work on the construction site
The rib and high-quality die-cast magnesium give more rigidity and at the same time a lighter weight.

Remarkable cutting performance
With the special cutting position of the KS 120, you can saw moldings up to 120 mm vertically or ceiling moldings and edge moldings in the "wall starting position" on the stop.

MMC electronics ensure material-compatible and safe working
Variable speed preselection, smooth start-up, overload protection and also an integrated quick brake.

Short preparation times, good results
Always perfectly prepared with FastFix to quickly and easily change the saw blade.

Even more convenient
Fine adjustment for setting the saw angle to the millimeter. Like all important controls, they can be easily and quickly adjusted from the front.

Unlimitedly mobile
With ergonomically placed left and right recessed handles, cable drum, transport lock and extraction clamp. In addition, it is extremely compact and lightweight in design.

A wide view of the workpiece and a dust-free environment
The dust extraction device and the chip collection funnel suck out the chips already at their point of origin.

Saves time, reduces errors
Miter angle for quick removal of internal and external corners and then easy and precise transfer to the saw.

Standing and transport frame in one
The base frame makes the KAPEX mobile and turns it into a sawing station in three simple steps. With a cross-section length of 2.40 m (including the cutting stop).

For standing work
The KAPEX fits exactly on the perforated plate of the MFT 3 Kapex. It is fixed with a mounting kit.

For processing even large workpieces
The individually extendable table extension ensures safe and precise support even for long workpieces

Antistatic function
Mobile dust extractors and machines with an antistatic function against the formation of static charge during operation.

MMC Electronic Digital
Processor-controlled power electronics "Multi Material Control" with adjustable, constant speed and temperature monitoring for material-compatible processing.

Precise double-line laser
Two laser lines for easy and precise positioning to the right or left of the marking.