REMS pipe flushing and pressure testing device Multi-Push SL Set

Dimensions L × W × H: 570 × 370 × 530 mm (22.4"× 14.6"× 20.9")
Printer paper roll: Ø 57 ×≤ 33 mm
Weight: 36.7 kg
Device storage temperature: ≥ 5°C (≥ 41 °F)
Water temperature: 5°C – 35°C (41 °F – 95 °F)
Ambient temperature: 5°C – 40°C (41 °F – 104 °F)
pH value: 6.5–9.5
Minimum control volume: about 10 l

Compressor
Working pressure: ≤ 0.8 MPa/8 bar/116 psi
Oil deposition rate: oil-free
Suction capacity: ≤ 230 Nl/min
Compressed air tank volume: (fig 1 (35)) 4.9 l
Condensate and particle filter: 5 µm

Flushing of pipe systems
Flushing of water connections: DN 25, 1"
Water pressure in the pipe network: ≤ 1 MPa/10 bar/145 psi
Water pressure when flushing with compressed air: ≤ 0.7 MPa/7 bar/101 psi
Water flow: ≤ 5 m⊃3;/h
Installation pipe diameter: ≤ DN 50, 2"

Pressure testing of gas installations (REMS Multi-Push SL/SLW)
Pressure testing with compressed air: ≤ 0.3 MPa/3 bar/44 psi
Reading accuracy < 200> Reading accuracy ≥ 200 mbar: 100 hPa/0.1 bar/1.5 psi 1.4

Electrical/electronic data
Power supply: 230 V~; 50 Hz; 1500 W 110 V~; 50 Hz; 1500 W
Switch box protection class: IP 44
Device, motor protection class: IP 20
Protection class: I
Operating mode (continuous mode): S 1
Display (LCD): 3.0"
Resolution: 128 × 64 pixels
Data transfer: with USB stick
Printer battery: NiMH 6 V --- –; 800 mAh
Printer charger: Input 100–240 V~; 50–60 Hz; 0.15 A; Output 5 V --- –; 680 mA

Delivery set:
2 suction and pressure hoses Ø 1", with textile lining, 1.5 m long, with screw connections 1", with closures
1 compressed air hose Ø 8 mm, 1.5 m long, with quick coupling DN 5 and hose fitting G ½" for pressure testing with compressed air
Compressor and water supply connection hose, 0.6 m long, with quick coupling DN 7.2 and 1" hose fitting
​1" double nipple, for blowing out water residues from the REMS Multi-Push device and from the suction and pressure hoses after the work is completed

Electronic flushing and pressure testing device with an oil-free compressor
For flushing pipe systems with water and a mixture of water and air, for disinfection, cleaning, preservation, e.g. for cleaning radiator and surface heating systems from mud, for cleaning and preservation; for flushing and disinfecting drinking water installations; for pressure testing of pipe systems and containers with compressed air; for controlled filling of all types of containers with compressed air using a compressed air pump p ≤ 0.8 MPa / 8 bar / 116 psi
For use with compressed air tools ≤ 230 Nl/min
Input and control device
Piston compressor with crank mechanism, capacitor motor 230 V, 50Hz, 1500W
Circuit breaker (PRCD)
Movable steel pipe body
REMS Multi-Push water inlet and outlet closures
Without disinfection unit, without cleaning and preservation unit