Festool Guide Rail FS 1080/2

Length: 1080 mm

Invented and perfected by Festool: guide rails.
For cuts and grooves that impress with their precision.
With a sliding coating for smooth machine operation and a groove for countersunk screws and lever clamps or splinter guard for splinter-free sawing.
A breakthrough in precision and simplification of work since 1964.
The guide rail is available in 8 different lengths, from 800 to 5000 mm.

Play-free guidance – you can adjust the plunge saw guide jaws without tools so that it fits perfectly on the guide rail.
Cut without splintering – the splinter guard directly on the marking prevents edge splintering even when making angled cuts.
Precise results – the router guide stop is designed for precise grooves.
Quick for diagonal cuts – with the guide rail and combination square, it is very easy to transfer angles measured from the workpiece or wall.

Work flows smoothly
The sliding coating ensures the machine's movement on the guide rail.

Safely limited
The kickback stop limits guidance or ensures that plunge saws do not kick back when plunging into the workpiece.

Precise angles
With the combinable bevel angle and guide rail, angles can be transferred directly and easily to the workpiece without much calculation and testing.

Straight as a string cuts
When combined with a jigsaw, precise cuts can be achieved up to 20 mm thick wood.

Precise grooves
For precise and straight grooves, it is recommended to use a router with a stop. Place it directly on the guide rail and mill.

Play-free guidance
The plunge saw guide jaws can be set on the guide rail without tools. This allows for play-free machine guidance and precise cuts.

Slipping out of place is excluded
The grip cover holds the rail firmly in place and at the same time protects the surface. For even greater support, there are clamps, quick clamps FS-Rapid, and a lifting handle GECKO with two suction cups.

No deviations
The rubber edge directly at the marking protects the edges from tearing open as a splinter guard - even when making angled cuts.

Convenient connection
With the connecting piece, two guide rails can be easily connected and aligned.

Does not get stuck
The waste guide prevents the suction hose and cable from getting stuck at the end of the guide rail.